| 7 077 Rollix Slewing Ring Bearings | Cone Part Number:86650; C90 - Dynamic Radial Rating (90 million revolutions)5:29000 lbf; a - Effective Center Location4:-0.06 in; Design Units:Imperial; Aa - Cage-Cone Backface Clearance:0.25 in; C0 - Static Radial Rating:145000 lbf; Series:86000; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:195000 lbf; G1 - Heat Generation Factor (Roller-Raceway):466.3; K - Factor8:1.58; da - Cone Frontface Backing Diameter:6.93 in; |
| 68805A Franke Slewing Ring Bearings | Series:M249700; da - Cone Frontface Backing Diameter:10.63 in; Ab - Cage-Cone Frontface Clearance:0.17 in; G2 - Heat Generation Factor (Rib-Roller End):173; Cone Part Number:M249749; G1 - Heat Generation Factor (Roller-Raceway):1626; Aa - Cage-Cone Backface Clearance:0.28 in; R - Cone Backface To Clear Radius3:0.14 in; d:10.0000 in; Design Units:Imperial; a - Effective Center Location4:-0.27 in; db - Cone Backface Backing Diameter:10.79 in; |
| 27 0541 01 Rollix Slewing Ring Bearings | Static Load Rating:6570 lbf; Dynamic Load Rating:10800 lbf; Dimension M:0.193 in; Radius r:0.6 mm; Center of Bearing from End S:11.99 mm; Number of Set Screws:2; Bearing Type:Ball Bearing; Inner Ring Width B:32.54 mm; Dimension S1:36.41 mm; Bore Type:Cylindrical bore; Lubrication Type:Relubricatable; Weight:0.50 lb; Seal Type:Molded Shroud; Outside Diameter D:3.937 in; Outside Ring Width C:24.000 mm; |
| 7 1140 13 Rollix Slewing Ring Bearings | Fillet Radius ra:2.00 mm; D:190.0000 mm; d:105.000 mm; B:36.00 mm; Basic Static Radial Load Rating Co:153000 N; Oil Speed Rating n2:11000 rpm; Fillet Radius rb:1.00 mm; Basic Dynamic Radial Load Rating C:168000 N; Grease Speed Rating n1:7400 rpm; |
| 77270A Franke Slewing Ring Bearings | Seals or Shields:Open Type; D:80mm; Weight:0.26 KGS; Speed Rating (r/min):14700; Availability:In Stock; Clearance:Standard; Dynamic Load Rating (kN):19.7; d:50mm; B:16mm; SKU:3mm9110wicrsum-timke; Static Load Rating (kN):26.3; Cage Type:Plastic; |
| 68791A Franke Slewing Ring Bearings | Ca90 - Dynamic Thrust Rating (90 million revolutions)7:70500 N; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:35200 lbf; R - Cone Backface To Clear Radius3:5.080 mm; da - Cone Frontface Backing Diameter:130 mm; G2 - Heat Generation Factor (Rib-Roller End):58.3; Design Units:METRIC; Cone Part Number:XAA32024X; WPD:172.3 mm; C0 - Static Radial Rating:466000 N; DD:155.8 mm; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:136000 lbf; |
| 68793A Franke Slewing Ring Bearings | Availability:In Stock; Cage Type:Brass; d:170mm; Weight:0.02 KGS; D:280mm; SKU:23134-e1a-m-qbl; Clearance:Standard; Seals or Shields:Open Type; B:88mm; |
| 77320B Franke Slewing Ring Bearings | Ab - Cage-Cone Frontface Clearance:0.15 in; a - Effective Center Location4:-0.59 in; Cone Part Number:EE107060V; d:6.0000 in; db - Cone Backface Backing Diameter:7.13 in; Series:107000; K - Factor8:1.51; da - Cone Frontface Backing Diameter:6.73 in; G2 - Heat Generation Factor (Rib-Roller End):76.3; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:35900 lbf; Cage Type:Stamped Steel; Aa - Cage-Cone Backface Clearance:0.27 in; |
| 7 0573 Rollix Slewing Ring Bearings | Bearing Type:Split Cylindrical Re; Housing Width:6.8 in; Dimension H :8-1/4 in; Dimension M :8 in; Dimension L :29-3/8 in; Support Type:Four-Bolt Plummer Bl; Cr - Dynamic Load Rating:136576 lbf; Seal Type:High Temperature Pac; Note:This product line wa; Dimension J2 :22-1/2 in; Dimension J1 :25 in; Pillow/Plummer Block Style:Split Cylindrical Ho; Series Type:Light Series; Bearing Number:LSE715BR; |
| 2 082 Rollix Slewing Ring Bearings | B:16mm; Clearance:Standard; Weight:0.09 KGS; SKU:4203j-nsk; Availability:In Stock; Cage Type:Steel; d:17mm; Seals or Shields:Open Type; D:40mm; Static Load Rating (kN):9.5; Grease Limiting Speed (r/min):13000; Oil Limiting Speed (r/min):18000; Dynamic Load Rating (kN):14.6; |
| 23 0941 01 Rollix Slewing Ring Bearings | d:55mm; D:78mm; SKU:51111-nsk; Clearance:Standard; Weight:0.23 KGS; Grease Limiting Speed (r/min):2800; Availability:In Stock; Oil Limiting Speed (r/min):4300; Seals or Shields:Open Type; Cage Type:Steel; Dynamic Load Rating (kN):35; Static Load Rating (kN):93; B:16mm; |
| 38 0541 01 Rollix Slewing Ring Bearings | Bolt Hole Width:2.25 in; Adapter Assembly Number1:SNP-3188 x 16-1/2; Housing Only2:SDAF3188K x 16-1/2; Full Timken Part Number:SDAF23188K16-1/2; Stabilizing Ring 1 Reqd3:A8976; B:52.0000 in; E Max.:46.1250 in; Triple Seal Reqd:ER 958-1; Assembly Weight:4600.000 lb; Bearing Number:23188K; D:5.5000 in; C:21.0000 in; F:14.5 in; Diameter S-1:16 1/2 in; Bolt Hole Length:3.125 in; H:33.7500 in; E:45.2500 in; |
| 74112A Franke Slewing Ring Bearings | Dimension H2:15.9 in; Dimension M:6.0 in; Dimension H1:1.5 in; Bearing Type:Split Cylindrical Re; Cr - Dynamic Load Rating:146800 lbf; Bearing Number:HSM105BR; Maximum Speed:1820 rpm; Seal Type:High Temperature Pac; Bearing - Housing - Seal:HSM105BRHHTPS; Dimension L:20.2 in; Housing Width:7.9 in; Ca - Axial Load Rating:7014 lbf; Shipping Weight:431 lb; Dimension K:3.2 in; Dimension H:7.520 in; Bolt Size:4 x M24; |
| 73124L Franke Slewing Ring Bearings | D:55mm; Reference Speed Rating (r/min):18000; Seals or Shields:Two Rubber Seals; Clearance:Standard; Cage Type:Steel; d:30mm; Dynamic Load Rating (kN):13.2; SKU:60062rs-timken; Limiting Speed Rating (r/min):12000; B:13mm; Static Load Rating (kN):8.3; Weight:0.12 KGS; Availability:In Stock; |
| 6 2810 09 Rollix Slewing Ring Bearings | Dimension M:7.0 in; Bearing UPC:013992032645; Dimension K:4.7 in; Note:This product line wa; Cor - Static Load Rating:133087 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; Seal Type:Viton Single Lip; Bearing Number:MSE408BX; Bearing - Housing - Seal:MSE408BXHRSS; Cr - Dynamic Load Rating:102063 lbf; Maximum Speed:1820 rpm; Dimension H:6.378 in; Dimension J:17.7 in; Dimension H1:1.5 in; Series Type:Medium Series; |
| 75058A Franke Slewing Ring Bearings | Basic Static Radial Load Rating Co:3400 N; Grease Speed Rating Open/Shielded n1:15000 rpm; d:30.000 mm; B:7.00 mm; Accessories:One Shield; Oil Speed Rating Open/Shielded n2:18000 rpm; Sealed Speed Rating n3:9500 rpm; D:42.0000 mm; Fillet Radius ra:0.30 mm; Basic Dynamic Radial Load Rating C:4490 N; |
| No. | Brand | Y | F | H | E | A | S | B | U |
| 74170A | Franke | - | - | - | - | - | - | - | - |
| 66167L | Franke | - | - | - | - | - | - | - | - |
| 77202B | Franke | - | - | - | - | - | - | - | - |
| 38 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 68470A | Franke | - | - | - | - | - | - | - | - |
| 3 0785 | Rollix | - | - | - | - | - | - | 13mm | - |
| 6 2810 09 | Rollix | - | - | - | - | - | - | - | - |
| 2 1715 | Rollix | - | - | - | - | - | - | 20.60 mm | - |
| 7 1997 04 | Rollix | - | - | - | - | - | - | 14mm | - |
| 2 1565 02 | Rollix | - | - | - | - | - | - | 66.675 mm | - |
| 1 1595 | Rollix | - | - | - | - | - | - | 25mm | - |
| 31 0741 01 | Rollix | - | - | - | - | - | - | 73mm | - |
| 77282A | Franke | - | - | - | - | - | - | - | - |
| 69704L | Franke | - | - | - | - | - | - | 48.00 mm | - |
| 1 213 | Rollix | - | - | - | - | - | - | 13.25mm | - |
| 24 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 33 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 2 0626 01 | Rollix | - | - | - | - | - | - | 47mm | - |
| 6 2500 01 | Rollix | - | - | - | - | - | - | 20mm | - |
| 75063A | Franke | - | - | - | - | - | - | - | - |
| 28 0741 01 | Rollix | - | - | - | - | - | - | - | - |
| 34 0541 01 | Rollix | - | - | - | - | - | - | 60mm | - |
| 68959A | Franke | - | - | - | - | - | - | - | - |
| 24 0641 01 | Rollix | - | - | - | - | - | - | - | - |
| 22 1091 01 | Rollix | - | - | - | - | - | - | - | - |
| 28 0941 01 | Rollix | - | - | - | - | - | - | - | - |
| 35 0941 01 | Rollix | - | - | - | - | - | - | 25.00 mm | - |
| 39 0941 01 | Rollix | - | - | 0.698 in | 15.010 in | - | - | - | - |
26 1091 01 Rollix Slewing Ring Bearings Video
26 U.S.C. § 1091 - U.S. Code Title 26. Internal Revenue Code §
(a) Disallowance of loss deduction. --In the case of any loss claimed to have been sustained from any sale or other disposition of shares of stock or ...
Loss from Wash Sales of Stock or Securities 26 CFR 1.1091-1
Dec 21, 2007 — Section 1091(a) provides that in the case of any loss claimed to have been sustained from any sale or other disposition of shares of stock or ...4 pages
26 CFR Ch. I (4–1–09 Edition) § 1.1091–1
May 18, 2009 — 26 CFR Ch. I (4–1–09 Edition). § 1.1091–1 ... §1.1091–1 Losses from wash sales of ... cause of the provisions of section 1091, no.
26 CFR 1.1091-1 -- Losses from wash sales of stock or ... - eCFR
(a) A taxpayer cannot deduct any loss claimed to have been sustained from the sale or other disposition of stock or securities if, within a period beginning ...
26 CFR § 1.1091-1 - Losses from wash sales of stock or ...
(a) A taxpayer cannot deduct any loss claimed to have been sustained from the sale or other disposition of stock or securities if, within a period beginning ...
26 CFR 1.1091-1 - Losses from wash sales of stock or securities.
Title 26 - Internal Revenue Chapter I - INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) Subchapter A - INCOME TAX (CONTINUED) Part 1 ...